• Introduction:
    Sand Washing Machine is equipment used for cleaning materials and separating dust, and it usually integrates cleaning, dehydration and classification together. This machine can be used to metallurgy, building materials and hydropower, etc. industries, which is more suitable for building sand.
  • Advantage:
    1. Reasonable structure,
    2. Large capacity,
    3. Low consumption,
    4. Little loss of the sand during the washing process,
    5. Low failure rate.
  • Working Principle:
    The electric motor runs slowly with the impellor after decelerated by the belt, decelerator and gears wheel. The sand and stone flow into washing launder from feeding launder, rolls with the impellor, and grinds each other. The impurity covering the sand is washing away. At the same time, add more water, the strong water flow will take away waste and some low-weight wastes from washing launder. Through the above process, the washing function is finished. The clean sand and stone is lift up by vane. When it goes up slowly, the water begins to drop through the mesh and fall back in the washing launder. On one hand, water is removed from the sand and stone; on the other hand, the water can be fully used. Finally, the sand and stone goes to the out launder from the rotary impellor to finish the washing task.
  • Technical Parameters:

    Specifications - Technical Data

    Model Wheel Size (mm) Max feed size (mm) Power (KW/HP) Weight (t) Capacity (t/h) Overall dimension (mm)
    XSD2610 Φ2600×1000 10 5.5/7.5 2.6 20-50 3255×1982×2690
    XSD2816 Φ2800×1600 10 11/15 4.2 30-60 3540×3000×2880
    XSD3016 Φ3000×1600 10 15/20 5.5 50-100 3845×3000×3080
    XSD3220 Φ3000×2000 10 15/20 8.3 60-150 4150×3500×3300
    XSD3620 Φ3000×2000 10 15/20 9.8 80-150 4500×3500×3700
    XL915 Ø915×7585 10 18.5(25) 6.3 60-100 8900×2861×3821
    2XL915 Ø915×7585 10 2X11(15) 11.2 120-200 8900×3765×3821
    XL1115 Ø1115×9785 10 18.5(25) 10.8 100-175 11270×3645×4340
    2XL1115 Ø1115×9785 10 2X18.5(25) 18 200-350 11270×4365×4415